Non-Cariogenic Effect of Milk and Dairy Products on Oral Health in Children and Adolescents: A Scoping Review.

Diet plays an important role in the etiopathology of dental caries. Milk and dairy products (DPs), especially in children and adolescents, are important sources of protein, calcium and phosphorus and could have an effect on dental and oral health. The aim of this scoping review was to analyze the scientific literature on the non-cariogenic effect of milk and DPs, with a focus on their potential to prevent dental caries in children and adolescents. PubMed, EMBASE, and Web of Science were searched for publications relevant to our topic from January 2013 to 30 September 2023. Thirty-eight studies were included in the qualitative analysis. The included studies highlight the properties of milk and DPs that contribute to enamel remineralization, exhibit antibacterial action, inhibit the growth of cariogenic bacteria, and promote a balanced oral microbiome. With regard to the addition of probiotics (PBs) and fluoride (F) to DPs, the mixed results of the studies analyzed did not allow a clear statement to be made about their non-cariogenic effects. However, several studies show that the addition of PBs can reduce cariogenic bacteria, create a protective barrier against pathogens and support the host's natural defense mechanisms. Further long-term and high-quality studies are needed to understand the impact of milk and its constituents on oral health in order to promote effective caries prevention strategies in children and adolescents.

New insights on collagen structural organization and spatial distribution around dental implants: a comparison between machined and laser-treated surfaces.

BACKGROUND: One of the main factors for the osseointegration of dental implants is the development of an adequate soft tissue barrier, mainly composed by collagen, which protects the implant from bacterial development. The structural features of the peri-implant collagen are influenced by the implant components and, in particular, by the type of the surface. In the clinical practice, healing abutments are characterized by smooth surfaces, named machined. Recently, a new laser technique, Synthegra, has been developed to obtain a topography-controlled surface with micrometric regular pores that seems reducing the risk of peri-implantitis. Based on this background, this study aims investigating the structural organization and spatial distribution of collagen surrounding healing abutments characterized by laser-treated and machined surfaces. METHODS: Gingiva portions surrounding custom-made healing abutments (HA), characterized by alternated laser-treated and machined surfaces, were collected and analyzed by combining Fourier Transform InfraRed Imaging (FTIRI) spectroscopy, a non-invasive and high-resolution bidimensional analytical technique, with histological and multivariate analyses. RESULTS: Masson's trichrome staining, specific for collagen, highlighted a massive presence of collagen in all the analyzed samples, evidencing a surface-related spatial distribution. The nature of collagen, investigated by the FTIRI spectroscopy, appeared more abundant close to the laser-treated surface, with a perpendicular disposition of the bundles respect to the HA; conversely, a parallel distribution was observed around the machined surface. A different secondary structure was also found, with a higher amount of triple helices and a lower quantity of random coils in collagen close to the laser treated surfaces. CONCLUSIONS: FTIRI spectroscopy demonstrates that the use of a laser treated transmucosal surface can improve the morphological organization of the peri-implant collagen, which presents a distribution more similar to that of natural teeth. TRIAL REGISTRATION: This trial is registered with ClinicalTrials.gov Identifier: (Registration Number: NCT05754970). Registered 06/03/2023, retrospectively registered, https://clinicaltrials.gov/show/NCT05754970 .

Use of over-the-counter mouthwashes as an additional measure in individual oral prophylaxis on adults with plaque-induced gingivitis: a double-blind, parallel, randomized controlled trial.

BACKGROUND: Plaque-induced gingivitis is a chronic inflammatory condition characterized by complete reversibility of tissue damage once the periodontal biofilm has been disorganised. The aim of this study was to evaluate the efficacy of two commercially available mouthwashes (MWs) versus a chlorhexidine (CHX) 0.12% MW in reducing gingival bleeding (GB) in adults with plaque-induced gingivitis. METHODS: The present study was a double-blind, parallel, randomized controlled trial involving 6492 gingival sites (i.e. 39 subjects × 28 teeth × 6 sites/tooth) aged 18-75 years. During a 2-week period, subjects were randomized to receive MWs: a control CHX 0.12% MW (group C, 1818 sites); a MW test containing CHX 0.09% + Citrox®/P complex (group CX, 2628 sites); a MW test based on natural compounds (group P, 2016 sites). GB was assessed at the inclusion visit (T0) and after 2 weeks of MW use (T1). Analyses of GB were compared between groups and then restricted to subjects with bleeding sites between 10 and 30% (moderate gingivitis) or ≥ 30% (severe gingivitis) at T0. Pairwise comparisons were made between groups and logistic regression was used to identify correlates of GB (T1). RESULTS: For total bleeding site analysis, GB reduction between T0 and T1 ranged from 23% (C), 26% (CX) and 36% (P), respectively (all p < 0.05). Multiple comparison between groups showed that group C was significantly less effective (p < 0.05) than groups CX and P. Splitting the analysis, in patients with severe gingivitis (≥ 30% bleeding sites at T0), all MWs had a positive effect on GB with a reduction at T1 of 36% (C), 33% (CX) and 42% (P), respectively. While GB reduction between T0 and T1, was significant for all groups, the comparison among groups showed no significant difference between group C and CX, whereas the improvement was significant for group P. On the other hand, in adults with moderate gingivitis (< 30% bleeding sites at T0), only CX and P had a positive effect on GB reduction at T1(9% in CX and 2% in P, respectively), although the differences between the three groups were not significant. CONCLUSION: The daily use of MWs with natural components (groups P and CX) for 2 weeks should be considered positively as an adjunct to individual oral prophylaxis to reduce GB compared to the control MW containing CHX 0.12% (group C) in healthy adults with plaque-induced gingivitis. For subjects with severe gingivitis, it is advisable to first use natural MW (P) and then MW based on CHX 0.09% with natural components (CX), compared to MW with CHX 0.12% (C). For adults with moderate gingivitis, P and CX can be advisable, even if no definitive recommendations can be drawn. TRIAL REGISTRATION: ACTRN12622000215729, 07/02/2022.

Multidisciplinary evaluation of the remineralization potential of three fluoride-based toothpastes on natural white spot lesions.

OBJECTIVES: This in vitro study aimed assessing the remineralization potential of three commercial fluoride-based toothpastes in permanent teeth with natural white spot lesions (WSLs). A multidisciplinary approach based on Raman microspectroscopy (RMS), Scanning electron microscopy (SEM), Energy-dispersive x-ray spectroscopy (EDS), and Vickers microhardness (VMH) was exploited. METHODS: N = 12 human molars with natural WSLs in the proximal-vestibular zone were selected and divided into 4 groups (n = 3) according to the different treatments: HAF (hydroxyapatite with fluoride ions); SMF (sodium monofluorophosphate with arginine); SF (sodium fluoride with enzymes), and CTRL (untreated group). All toothpastes tested contained 1450 ppm of fluoride. Teeth samples were submitted to the following protocol: a 7-day pH cycling treatment, with two daily exposures (2 min each time) to the commercial toothpastes described above. The surface micromorphology (SEM), the chemical/elemental composition (RMS and EDS), and the Vickers microhardness (VMH) were evaluated. Statistical analysis was performed. RESULTS: A remarkable remineralization of WSLs in SEM images was observed in all treated groups compared to CTRL. In particular, HAF and SF displayed higher values of VMH, phosphates amount (I960), crystallinity (FWHM960), and lower ones of C/P (I1070/I960) with respect to CTRL. Intermediate values were found in SMF, higher than CTRL but lower with respect to HAF and SF. As regards the Ca/P ratio, statistically significant differences (p < 0.05) were found between SF and the other groups. CONCLUSIONS: All the tested dentifrices have shown to remineralize the WSLs. SF and HAF have comparable capability in hardness recovery and crystallinity; however, SF shows the best remineralizing potential according to both micromorphological and chemical analyses. Clinical relevance The daily use of toothpastes containing hydroxyapatite partially replaced with fluoride, sodium monofluorophosphate with arginine and sodium fluoride toothpaste associated with enzymes represents a preventive, therapeutic, effective, and non-invasive tool for remineralize WSLs.

Multivariate curve Resolution-Alternating least squares coupled with Raman microspectroscopy: new insights into the kinetic response of primary oral squamous carcinoma cells to cisplatin.

Raman MicroSpectroscopy (RMS) is a powerful label-free tool to probe the effects of drugs at a cellular/subcellular level. It is important, however, to be able to extract relevant biochemical and kinetic spectroscopic signatures of the specific cellular responses. In the present study, a combination of Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS) and Principal Component Analysis (PCA) is used to analyse the RMS data for the example of exposure of primary Oral Squamous Carcinoma Cells (OSCC) to the chemotherapeutic agent cisplatin. Dosing regimens were established by cytotoxicity assays, and the effects of the drug on cellular spectral profiles were monitored from 16 to 72 hours post-exposure using an apoptosis assay, to establish the relative populations of viable (V), early (EA) and late apoptotic/dead (LA/D) cells after the drug treatment. Based on a kinetic model of the progression from V > EA > D, MCR-ALS regression analysis of the RMS responses was able to extract spectral profiles associated with each stage of the cellular responses, enabling a quantitative comparison of the response rates for the respective drug treatments. Moreover, PCA was used to compare the spectral profiles of the viable cells exposed to the drug. Spectral differences were highlighted in the early stages (16 hours exposure), indicative of the initial cellular response to the drug treatment, and also in the late stages (48-72 hours exposure), representing the cell death pathway. The study demonstrates that RMS coupled with multivariate analysis can be used to quantitatively monitor the progression of cellular responses to different drugs, towards future applications for label-free, in vitro, pre-clinical screening.

Prevalence, Severity of Extension, and Risk Factors of Gingivitis in a 3-Month Pregnant Population: A Multicenter Cross-Sectional Study.

The scope of this study was to assess the prevalence, severity of extension, and risk factors of gingivitis among pregnant women. In this cross-sectional study, 220 nulliparous women at 3 months of pregnancy were recruited in 2022 at the first obstetrical visit in Dakar, Senegal. Demographic characteristics, lifestyle habits, prenatal clinical status, and oral clinical parameters were recorded. Multivariable logistic regression modeling was used to assess relationships between gingivitis and risk factors. Eighty-eight percent of women had gingivitis, 15% were classified as moderate and 73% as severe. A total of 66.7% (95% CI [28.8-92.1]) of the sites had bleeding on interdental brushing. The odds for gingivitis decreased significantly for women consuming more than five portions of fruits and vegetables per day (OR = 0.15; 95% CI [0.03-0.66]) and increased in women who had a professional activity (OR = 6.75; 95% CI [1.27-35.87]) and high education. Concomitantly, the percentage of dental plaque (OR = 131.6; 95% CI [10.80-1619.71] and the severity of clinical attachment loss (OR = 7.70; 95% CI [3.16-18.92]) were important risk factors. Inverse associations were observed with increasing body mass index (OR = 0.76; 95% CI [0.63-0.93]). Our results underline that gingivitis cases and bleeding were particularly high among 3-month pregnant women. Literacy and adequate oral hygiene actions to modify behaviors and to achieve meticulous biofilm disorganization could make a favorable change in the gingival health outcome. Additionally, further research is necessary to precisely determine the role of biofilm-induced gingivitis and systemic-induced gingivitis in improving gingival conditions.

Assessment of the Remineralizing Potential of Biomimetic Materials on Early Artificial Caries Lesions after 28 Days: An In Vitro Study.

This study aimed to evaluate the loss of mineral content in the enamel surface in early artificial lesions and to assess the remineralizing potential of different agents by means of SEM coupled with energy-dispersive X-ray analysis (EDX). The analysis was performed on the enamel of 36 molars divided into six equal groups, in which the experimental ones (3-6) were treated using remineralizing agents for a 28-day pH cycling protocol as follows: Group 1, sound enamel; Group 2, artificially demineralized enamel; Group 3, CPP-ACP treatment; Group 4, Zn-hydroxyapatite treatment; Group 5, NaF 5% treatment; and Group 6, F-ACP treatment. Surface morphologies and alterations in Ca/P ratio were evaluated using SEM-EDX and data underwent statistical analysis (p < 0.05). Compared with the sound enamel of Group 1, the SEM images of Group 2 clearly showed loss of integrity, minerals, and interprismatic substances. Groups 3-6 showed a structural reorganization of enamel prisms, interestingly comprising almost the entire enamel surface. Group 2 revealed highly significant differences of Ca/P ratios compared with other groups, while Groups 3-6 showed no differences with Group 1. In conclusion, all tested materials demonstrated a biomimetic ability in remineralizing lesions after 28 days of treatment.

A spectroscopic study on orthodontic aligners: First evidence of secondary microplastic detachment after seven days of artificial saliva exposure.

Clear orthodontic aligners have recently seen increasing popularity. The thermoplastic materials present several advantages, even if it is known that all plastic products can be subjected to environmental and mechanical degradation, leading to the release of microplastics (MPs). Their ingestion could cause oxidative stress and inflammatory lesions. This study aims to evaluate the potential detachment of MPs by clear aligners due to mechanical friction simulated with a 7-day protocol in artificial saliva. The study was performed on orthodontic clear aligners from different manufacturers: Alleo (AL); FlexiLigner (FL); F22 Aligner (F22); Invisalign® (INV); Lineo (LIN); Arc Angel (ARC), and Ortobel Aligner (OR). For each group, two aligners were immersed in artificial saliva for 7 days and stirred for 5 h/day, simulating the physiological teeth mechanical friction. After 7 days, the artificial saliva was filtered; then, filters were analyzed by Raman Microspectroscopy (RMS) and Scanning Electron Microscopy (SEM), respectively to chemically identify the polymeric matrix and to measure the number and size of the detected MPs. RMS spectra revealed that AL, FL, LIN, ARC, and OR aligners were composed by polyethylene terephthalate, while F22 and INV ones by polyurethane. SEM analysis showed that the highest number of MPs was found in ARC and the lowest in INV (p < 0.05). As regards MPs' size, no statistically significant difference was found among groups, with most MPs ranging from 5 to 20 µm. Noteworthy, a highly significant correlation (p < 0.0001) was highlighted between the distribution of MPs size and the different typologies of aligners. This in vitro study highlighted for the first time the detachment of MPs from clear aligners due to mechanical friction. This evidence may represent a great concern in the clinical practice since it could impact human general health.

Advances in diastema closure and tooth shape change using direct composite restorations: the Front Wing Technique.

Closing a diastema with a direct composite restoration still represents a real challenge for clinicians, mainly due to the need to create a correct contact point and emergence profile at the cervical level. The present article describes a novel anterior direct composite restoration technique for closing diastemata and changing tooth shape. The proposed technique, called the Front Wing Technique (FWT), does away with the use of the traditional wax-up and silicone index-based procedures. To date, there has been no effective way to transfer the anatomy modeled in the wax to the interproximal cervical area of anterior restorations every time these areas need to be corrected or restored. Therefore, the FWT provides a new approach to freehand model the emergence profile without gap formation. The cases in this article demonstrate the closure of maxillary and mandibular incisal diastemata, with the rationale behind each clinical step of the FWT described. This technique should be considered an alternative approach for the direct composite restoration of anterior teeth, saving chair time and cost.

Micro-computed tomography for assessing the internal and external voids of bulk-fill composite restorations: A technical report.

Purpose: This technical report aims to describe and detail the use of micro-computed tomography for a reliable evaluation of the bulk-fill composite/tooth interface. Materials and Methods: Bulk-fill composite restorations in tooth cavities were scanned using micro-computed tomography to obtain qualitatively and quantitatively valuable information. Two-dimensional information was processed using specific algorithms, and ultimately a 3-dimensional (3D) specimen reconstruction was generated. The 3D rendering allowed the visualization of voids inside bulk-fill composite materials and provided quantitative measurements. The 3D analysis software VG Studio MAX was used to perform image analysis and assess gap formation within the tooth-restoration interface. In particular, to evaluate internal adaptation, the Defect Analysis add-on module of VG Studio Max was used. Results: The data, obtained with the processing software, highlighted the presence and the shape of gaps in different colours, representing the volume of porosity within a chromatic scale in which each colour quantitatively represents a well-defined volume. Conclusion: Micro-computed tomography makes it possible to obtain several quantitative parameters, providing fundamental information on defect shape and complexity. However, this technique has the limit of not discriminating materials without radiopacity and with low or no filler content, such as dental adhesives, and hence, they are difficult to visualise through software reconstruction.

Remineralization Efficacy of Four Remineralizing Agents on Artificial Enamel Lesions: SEM-EDS Investigation.

Dental remineralization represents the process of depositing calcium and phosphate ions into crystal voids in demineralized enamel, producing net mineral gain and preventing early enamel lesions progression. The aim of the present study was to qualitatively and quantitatively compare the remineralizing effectiveness of four commercially available agents on enamel artificial lesions using Scanning Electron Microscopy (SEM) combined with Energy Dispersive Spectroscopy (EDS) techniques. Thirty-six extracted third molars were collected and randomly assigned to six groups (n = 6), five of which were suspended in demineralizing solution for 72 h to create enamel artificial lesions, and one serving as control: G1, treated with a mousse of casein phosphopeptide and amorphous calcium−phosphate (CPP-ACP); G2, treated with a gel containing nano-hydroxyapatite; G3, treated with a 5% SF varnish; G4, treated with a toothpaste containing ACP functionalized with fluoride and carbonate-coated with citrate; G5, not-treated artificial enamel lesions; G6, not demineralized and not treated sound enamel. G1−G4 were subjected to pH cycling over a period of seven days. Analyses of the specimens' enamel surfaces morphology were performed by SEM and EDS. Data were statistically analyzed for multiple group comparison by one-way ANOVA/Tukey's test (p < 0.05). The results show that the Ca/P ratio of the G5 (2.00 ± 0.07) was statistically different (p < 0.05) from G1 (1.73 ± 0.05), G2 (1.76 ± 0.01), G3 (1.88 ± 0.06) and G6 (1.74 ± 0.04), while there were no differences (p > 0.05) between G1, G2 and G6 and between G4 (2.01 ± 0.06) and G5. We concluded that G1 and G2 showed better surface remineralization than G3 and G4, after 7 days of treatment.

Oral Manifestations of COVID-19 in Hospitalized Patients: A Systematic Review.

BACKGROUND: COVID-19 disease first appeared in 2019 and quickly spread worldwide, causing a global pandemic. The oral cavity represents a target of SARS-CoV-2, and oral lesions are observed in both non-hospitalized and hospitalized patients. This systematic review aims to investigate the frequency of oral manifestations in COVID-19 hospitalized patients. METHODS: An electronic search was conducted in PubMed, Scopus, and Web of Science databases, including articles published up to September 2021. The review protocol was based on PRISMA-P. The risk of bias of the studies was assessed using the Joana Briggs Institute. The certainty of evidence was assessed using the GRADE instrument. RESULTS: Fifty-nine articles were included: 19 case reports, 17 case series, 2 case-control studies, 13 cross-sectional studies, 4 observational studies, and 4 retrospective studies. Oral ulcers, cheilitis, and tongue lesions were more common in patients before hospitalization, while perioral pressure ulcers, macroglossia, blisters, and oral candidiasis were more recurrent in patients during hospitalization. The first could be related directly to COVID-19, while the latter could be caused by medical devices, treatments, prone position, and immunological impairment. CONCLUSIONS: An accurate oral examination during the hospital admission of all confirmed COVID-19 cases is encouraged to recognize oral early manifestations and to apply appropriate treatments.

Hydrogen Peroxide Release Kinetics of Four Tooth Whitening Products-In Vitro Study.

Tooth whitening efficacy can be influenced by several factors, of which concentration and application time are two of the most important. This in vitro study aimed to evaluate the initial content and release kinetics of the hydrogen peroxide (HP) content, or the carbamide peroxide (CP) content as converted to its HP equivalent, of four tooth whitening products with different concentrations (6% HP, 16% CP, 10% CP, and 5% CP). Titrations with Cerium Sulphate IV were performed to determine HP concentration. HP release kinetics were evaluated by a spectrophotometric technique. The results were expressed as the mean values and 95% confidence interval of the percentage of hydrogen peroxide content during release kinetics. One sample t-test, one-way ANOVA, Tukey post hoc testing, and Pearson correlation testing were used, as appropriate, with a significance level of α = 0.05. The concentration of titrated HP was higher than that indicated by the manufacturers in all tested products (p < 0.01). At the minimum application times indicated by the manufacturers, all products released at least 85% of HP content; the gel containing 10% CP registered the lowest release at 85.49 (81.52-89.46). There was a significant HP release in all products during the application times indicated by the manufacturers. Further studies are needed to assess in vitro release kinetics.

Comparison of three different bulk-filling techniques for restoring class II cavities: µCT, SEM-EDS combined analyses for margins and internal fit assessments.

OBJECTIVE: Evaluation of the behavior of three different bulk-filling techniques in terms of internal adaptation and external marginal sealing for restoring class II cavities. METHODS: Fifteen extracted sound molar teeth were used. Two standardized class II mesio/disto-occlusal (MO/DO) slot cavities, 4 mm long, 4 mm wide and 3 mm deep were prepared in each tooth, obtaining n=30 cavity preparations. The cavities were randomly assigned into three groups (n=10 per group) according to three bulk filling techniques: Bulk Traditional (BT), Bulk&Go (BG) and Bulk&Flow (BF). The teeth were analyzed by scanning electron microscopy (SEM) to investigate the external marginal seal. Thereafter, the chemical composition of tooth-restoration interface was analyzed by energy-dispersive X-ray spectroscopy (EDS). Complementary information to the SEM and EDS were obtained by micro-computed tomography (µCT) to assess the internal fit. RESULTS: SEM analysis showed a proper external marginal seal for all groups tested as confirmed by the EDS investigation, highlighting the presence of adhesive layer at the tooth-restoration interface. The internal marginal adaptation by means of µCT analysis revealed gaps formation at the tooth-restoration interface only for BT group, while an intimate contact free of gaps were found in the other two groups. Moreover, in BT and BF groups voids were present within the restoration. SIGNIFICANCE: BG and BF techniques can be considered as reliable alternatives to BT technique, as they simplify the class II restoration without transforming it into class I, thus ensuring a successful result.

A Comparative Evaluation of Nanohydroxyapatite-Enriched Hydrogen Peroxide Home Bleaching System on Color, Hardness and Microstructure of Dental Enamel.

This study aimed to evaluate two hydrogen peroxide (HP)-based at-home bleaching systems in order to analyze whether nano-hydroxyapatite (nHA) addition may represent a reliable and safe solution for tooth whitening without altering dental microstructure and hardness. Human third molars (N = 15) were treated with two bleaching agents, one containing 6%HP (6HP) and the other 6% HP nHA-enriched (6HP-nHA) with average particle diameter ranging from 5-20 nm. Their effects on enamel were assessed using a spectrophotometer, Vickers microhardness (VMH) test and Scanning Electron Microscopy (SEM), comparing the treated groups with the non-treated control group (CTR). Color analysis revealed improvement in whiteness in both groups compared to CTR. VMH test results showed no differences among the groups. SEM analysis highlighted no evident changes in the enamel microstructure of tested groups compared to CTR. At high magnification, in 6HP group, a slight increase in irregularities of enamel surface morphology was observed, while 6HP-nHA group displayed removal of the aprismatic layer but preservation of the intact prismatic structure. These results suggest that the 6HP-nHA agent may be recommended to provide reliable whitening treatment, without damaging the enamel micromorphology and hardness.

Efficacy of personal protective equipment against coronavirus transmission via dental handpieces.

BACKGROUND: This laboratory study was done to evaluate the efficacy of personal protective equipment (PPE) and high-volume evacuation (HVE) against the spread of human coronavirus type 229E (HCoV-229E) during a standard dental procedure. METHODS: Patient and operator manikins were used to recreate a dental setting inside a custom-built class III cabinet-like chamber. The mouth of the patient manikin was inoculated with an HCoV-229E suspension, the viral load of which was similar to that of asymptomatic people infected with severe acute respiratory syndrome coronavirus 2. The dental procedure was performed with an air turbine handpiece and HVE for 10 seconds. The efficacy of surgical masks, N95 (filtering facepiece class 2) and filtering facepiece class 3 respirators, and face shields was tested via quantitative real-time polymerase chain reaction. RESULTS: The wide surface on which the inoculum was spread caused low contamination. Over the external surfaces of masks and respirators, when a face shield was not worn, viral loads ranged from 1.2 through 1.4 log10 mean gene copies per cm2. When the shield was worn, viral loads dropped below the detection limit (< 0.317 log10 gene copies/cm2) for all PPE. On the operator's forehead, viral loads were 0.6 through 0.8 log10 gene copies/cm2. Inside the operator manikin's mouth, viral loads were under the detection limit when using any PPE, with or without the shield. HVE did not significantly change viral loads. CONCLUSIONS: All PPE combinations significantly reduced viral loads in the operator manikin's mouth to below the detection limit, but HVE did not decrease viral contamination. PRACTICAL IMPLICATIONS: Although caution is suggested when removing and disposing of PPE to avoid self-contamination, the combination of PPE and face shields drastically decreases the risk of transmitting human coronavirus during aerosol-generating dental procedures.

Surface evaluations of a nanocomposite after different finishing and polishing systems for anterior and posterior restorations.

This study aims to evaluate the effects of different finishing and polishing (F/P) systems on gloss and surface morphology of a new nanocomposite. Thirty discs of Filtek Universal Restorative material (3 M, ESPE) were prepared and divided into six groups (n = 5). Group A and B followed F/P protocols for anterior restorations, whereas Group C and D for posterior ones. Group E represented the control (covered by Mylar strip) and Group F represented the nanocomposite placement by means of clinical hand instruments; Groups E and F did not undergo F/P procedures. Among the polished groups, Group B showed the highest values (68.54 ± 7.54 GU), followed by Group A and D (46.87 ± 5.52 GU; 53.76 ± 2.65 GU). Finally, Group C (37.38 ± 4.93 GU) displayed the lowest results. Overall, Group E showed the highest gloss values (93.45 ± 8.27 GU), while Group F presented the lowest ones (1.74 ± 0.64 GU). Surface analysis revealed that Group A, C, and D displayed a smooth surface. Group B showed the lowest irregularities. Group E exhibited the most uniform superficial morphology. On the other hand, Group F displayed the most irregular one. In conclusion, using the tested material, only two protocols achieved appropriate gloss values. Then, clinicians might use the protocols of Group B and Group D, for anterior and posterior restorations, respectively.